R&S Erection of Santa Clara County, Inc.

A service Company

Hollow Metal Doors & Fire Doors

HOLLOW METAL DOORS

R&S Erection of Santa Clara County proudly sells, installs and modifies hollow metals doors and framing to fit your needs. R&S provides products in the following categories by industry leaders such as SpecialLite, Mesker Door, DKS, SteelCraft, AMweld, Timely, RediFrame, Eliason, Simpson and Republic Door.

Metal Doors & Frames
Restaurant Doors
Wood Doors & Frames
Solid Core - Natural Finish Doors
Aluminum Frames

Complete hardware is also offered including:

Locksets
Closers
Motorized Openers
Sealants
Hinges
Full length Hinges
Wall Bumps & Floor Stops
Panic Hardware
Push/Pull Plates
Electric Strikes
Electromagnetic Door Holders
Flush Bolts & Door Coordinators

Standard stock consists of 3068 (3’0” x 6’8”) and 3070 doors. Other sizes are 3’6 and 4’0” wide, and up to 8’0” tall. As a WHI Labeled shop, we can also cut and modify openings to your specifications, and provide a WHI Fire Label. We can helps assist you with many more custom openings, such as:

Bullet Resistant
Lead-lined
STC (Accoustical)

 

DKS DOORS

We carry a large stock of DKS Doors. All DKS products are built to specification under Intertek / Warnock Hersey procedural report and manufacturing standard no. 3053378 and as amended November 29, 2004 and June 30, 2006. Materials comply to UL 10(b) and (c), UBC 7-2 (1997) Part 1, NFPA 252, CAN/ULC S104, ASTM E2074-00 and is in compliance with ANSI 250.4 and ANSI 250.8.

DKS products meet or exceed all SDI standards and is an affiliate member in good standing of HMMA (Hollow Metal Manufacturers Association) Division of NAMM (National Association of Architectural Metal Manufacturers).

1800 Series
Standard Flush Doors


18 Gauge
Cold Rolled or Galvanized Steel
Seamless Filled Edges
Full Body Polystyrene Core
Non- Handed Design
12-Gauge Closer Reinforcement
7-Gauge Hinge Reinforcement- Reversible
16-Gauge Flush Top Cap - Galvanized
16-Gauge Inverted Bottom Cap - Galvanized
Prime Painted Grey Two Part Epoxy Factory Applied, Baked On
Standard Lock Preparations Include 161, Fed 86 Edge, Panic Bar Reinforced
WHI / ITS up to 3 hour, Positive Pressure and “S” Smoke included
Meets or Exceeds Standards for ANSI 250.4 and ANSI 250.8
Hurricane Tested Florida Approved FL-13624
Prepared for Continuous Hinge Application



 

1500 Series
Retrofit / Replacement Doors


16 and 18 Gauge Doors
Cold Rolled or Galvanized Steel
Tight Corner Seam
Full Body Polystyrene Core
Non- Handed Design
12-Gauge Closer Reinforcement
Continuous 7-Gauge Channel Hinge Reinforcement Set at Heavy Duty Depth - Full Height
14- Gauge, 10-inch Lock Face Reinforcements
16-Gauge Flush Top Cap
16-Gauge Inverted Bottom Cap
Prime Painted Grey Two Part Epoxy Factory Applied, Baked On
Remove Skin at Desired Locations for Hinge Size -Template Drill and Tap, Apply Reversible Hinge Shim






4000 Series

Masonry Frames

16 Gauge Cold Rolled or Galvanized Steel
Unequal Rabbet 2-inch Face (Also availble with 4-inch Face Heads)
5/8” Stop Height
Exact Fit Mitered Corners
7 Gauge Hinge Reinforcements with Standard / Heavy Duty Adjustment
4-7/8” Universal Strike Preparation
Includes Floor Anchor
9/32” Silencer Preparation
Wall Anchors for Masonry, Wood Stud and Metal Stud Walls, loose or welded in
4-inch to 13-inch Jamb Depth
20-Minute to 3-Hour Label


5000 Series
Drywall Frames


16 Gauge Cold Rolled or Galvanized Steel
Unequal Rabbet 2-inch Face (Also availble with 4-inch Face Heads)
5/8” Stop Height
Exact Fit Mitered Corners with Screw Reinforcement Between Head and Jamb Sides
7 Gauge Hinge Reinforcements with Standard / Heavy Duty Adjustment
4-7/8” Universal Strike Preparation
Screw Adjusting Compression Anchors on Jamb Side
9/32” Silencer Preparation
5-5/8” to 9-3/4” Jamb Depth
1/2” Double Return
20-Minute to 3-Hour Label




Fire Rated Doors & Frames

 Building Codes such as NFPA-80 require many openings to be Fire Rated. We can help you create or modify openings to fit your needs. Ratings vary depending on the usage of the building, the wall rating and materials used.  Certain types of hardware must be used for Fire Rated and Fire Exit requirements as well as specific glass size and type limitations. Proper installation including approved anchors are required to pass inspection.

We can provide both DKS and Republic Doors with Fire Ratings, and are WHI Certified to modify and re-label assemblies in our shop.

 
DKS Products are certified by the WHI mark including: Positive pressure Smoke, and 20-minute to 3-hour fire ratings up to a maximum size of 8’0 x 8’0 in pair applications @ 3 hours with polystyrene or honeycomb cores. Available gauges are 16, 18 and 20 cold rolled or A40 hot dipped galvanized materials.










 

REPUBLIC

Common Republic Door Types:

18g HM Doors with Polystyrene insulation

16g HM Masonry and Drywall Frames

All Republic doors and frames have been fire tested in accordance with UL 10B, UL 10C, UBC 7-2, and ASTM E-152 and are all produced under Underwriters Laboratories and Warnock Hersey/ITS factory inspection and labeling service program.

Republic Tech Data Sheet No. 401 – Basic Fire Door Requirements